Quanta Computer QuantaMesh User Manual - page 800
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
800
6.11.2.5 bgp always-compare-med
Use bgp always-compare-med command to compare MED values always from peers in different ASes.
Use no bgp always-compare-med command to disable this function.
Syntax
bgp always-compare-med
no bgp always-compare-med
Default Setting
Disabled
Command Mode
Router BGP Config Mode
6.11.2.6 bgp default local-preference
This command change the default local preference value. To return the local preference value to the
default setting, use the no form of this command.
Syntax
bgp default local-preference
no bgp default local-preference
number - Local preference value from 0 to 4294967295.
Default Setting
100
Command Mode
Router BGP Config Mode