3Com NBX 100 Administrator's Manual - page 114
114
C
HAPTER
2: D
IAL
P
LAN
szOperation
— The name of the digit manipulation operation to perform:
stripLead, stripTrail, replace, prepend, append.
szValue
— A value used by the operation, either the string of digits to
prepend, append, replace with, or the number of digits to strip.
Example: This example command creates, for destination route 3,
entry 1, an operation numbered 1, with the associated function
stripLead, and an argument of 1, indicating that the command removes
(strips) one leading digit from the dialed number before dialing.
DestinationRouteOperation Create 3 1 1 stripLead 1
ExtensionLength
Syntax
ExtensionLength nExtensionLength
Description The length of extension numbers for system devices. The
default is 4 for NBX V3000 systems. The default is 4 for SuperStack 3 NBX
systems. The default is 3 for NBX 100 systems.
Arguments
nExtensionLength
— specifies either 3 to designate a a 3-digit dial plan, or
4 to designate a 4-digit dial plan.
ExtensionRange
Syntax
ExtensionRange szExtensionType szLowestExtension szHighestExtension
Description A range of extensions for each type of device. When the
system automatically generates extensions it assigns them from within
this range. When you manually generate an extension number, verify that
it is within the valid range. During a dial plan import operation, the
system does not validate that existing extensions are within the specified
range. 3Com
strongly
recommends that you configure the dial plan
before
you define any devices in the system.
Arguments
szExtensionType
— One of these: Telephone, Park, Auto Attendant, Hunt
Group, External.
szLowestExtension
— The lowest desired extension for this device type.
szHighestExtension
— The highest desired extension for this device type.