3Com NBX 100 Administrator's Manual - page 162
162
C
HAPTER
3: D
EVICE
C
ONFIGURATION
You can configure a line card port automatically (recommended) or
manually.
Verify that you have chosen a 3-digit or 4-digit dial plan before you begin
to configure line card ports. See
Chapter 2
.
Configuring a Line Card Port Automatically
To configure a line card port automatically:
1 Select NBX NetSet > System Configuration.
2 Click
System-wide
. The System Settings dialog box appears.
3 Enable the
Auto Discover Line Cards
check box.
4 Click
OK
.
Configuring a Line Card Port Manually
Most organizations use Auto Discovery to automatically configure line
card ports. However, you can configure a line card port manually and
select all settings.
To configure a line card port manually:
1 Select NBX NetSet >
Device Configuration
> Line Card Ports.
2 Click Add.
3 In the
Add Line Card Port
dialog box, specify the port information, and
then click
OK
. Click the Help button to see more information about the
dialog box fields.