3Com NBX 100 Administrator's Manual - page 338
338
C
HAPTER
8: O
PERATIONS
CAUTION: If you remove power from the NBX system without first
shutting down the system software using the NBX NetSet Shutdown
button, the operating system must perform a file system check during the
next startup cycle to ensure file integrity. The file system check
significantly increases the time it takes for the system to come to a ready
state. During a file system check operation, the NCP status lights S1 and
S2 flash in an alternating pattern.
Manage Data
This section describes these system data management operations:
■
Migration
■
Restore
■
Convert Database
■
Purge Database
■
Purge Database and CDR
■
Purge All Voice Mail
To perform data management operations, select Operations > Manage
Data. See the Help for procedures on managing your system data.
Migration
The Data Migration feature to enable you to move your data from one
NBX platform to another.
Table 63
describes the supported migration
paths.
Table 63 Data Migration Platforms and Software Revisions
Source
Target (must be R5.0 or higher) Notes
NBX 100
SuperStack 3 NBX
The NBX 100 must be at
R4.2.X or higher.
NBX V3000
NBX V3000
SuperStack 3 NBX
The NBX V3000 must be at
R4.4.X or higher.
NBX 100
Unsupported.
SuperStack 3 NBX
NBX V3000
The SuperStack 3 NBX
must be at R4.2.X or
higher.
NBX 100
Unsupported.