3Com NBX 100 Administrator's Manual - page 262
262
C
HAPTER
5: S
YSTEM
C
ONFIGURATION
Regional Settings
After you install regional software and components from the regional
packs, you can enable regional settings. To enable these regional settings
in NBX NetSet, you select the appropriate country and language for the
system voice prompts, the technical tones and cadences, and the online
user documentation.
To enable regional settings, select System Configuration > System
Settings > Regional Settings. See the Help for the procedure on enabling
regional settings.
See
“Regional Software”
on
page 347
for information on installing
regional language packs.
Advanced Regional Settings
The NBX system also allows you to choose different regional settings for
the system voice prompts, the technical tones and cadences, and the
online user (not administrator) documentation. For example, you may
require local tones and cadences but may want the documentation to be
in English and the voice prompts in Australian English.
You can select separate regional settings for:
■
Voice prompts — The Auto Attendant voice prompts.
■
Documentation — The NBX Telephone Guide, the NBX NetSet user
Help, the LabelMaker utility, and the quick reference cards.
■
Tones and Cadences — The tones and the patterns of rings (cadence)
versus silence. Tones and cadences vary from country to country.
Examples:
■
United States ringing cadence (pattern) is 2 seconds of ring
followed by 4 seconds of silence.
■
United Kingdom ringing cadence is 2 rings within approximately 2
seconds followed by 2 seconds of silence.
■
United States busy tone is 0.75 seconds of tone followed by 0.75
seconds of silence.
To enable different regional settings:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Configuration > System Settings > Regional Settings >
Advanced. See the Help for procedures on selecting regional settings.