3Com NBX 100 Administrator's Manual - page 409
Preparing for Installation
409
Configuring Licenses
To configure licenses, you must enter system information, such as the
number of H.323 ports that you want to install. You can find this
information through NBX NetSet.
You can purchase licensed keycodes to unlock additional ports. A license
provides a software key that unlocks ports that are already loaded. You
can purchase licenses to enable or upgrade a system to:
■
1, 2, 4, 8, 16, 32, 64 or 100 ports on an NBX V3000 system
■
1, 2, 4, 8, 16, 32, 64 or 100 ports on a SuperStack 3 system
■
1, 2, 4, 8, or 16 ports on an NBX 100 system
Software keys are tied to the system serial number.
To configure licenses:
1 Log on to NBX NetSet:
a Open your browser and connect to the Call Processor by using its IP
address (example: 192.168.1.190) or host name (example: Home).
b Click Administrator.
c Enter your username and password.
d Click OK.
2 Access and record the Call Processor MAC address:
a In the NBX NetSet - Main Menu window, click Reports.
b Click the System Data tab.
c Record the MAC address.
MAC addresses use colons as separators. Take care to record the Call
Processor MAC Address, not the Music-on-Hold MAC address, which also
appears in the System Data tab.
3 Determine the number of port licenses:
a Return to the NBX NetSet - Main Menu window.
b Click Operations.
c Click the Licenses tab.
d Record the number of licenses for the H.323 Gateway.
e Click Add License.