3Com NBX 100 Administrator's Manual - page 157
Configuring the NBX Attendant Console
157
To change the name of an extension:
1 Select NBX NetSet >
Device Configuration
> Call Park.
2 Select the extension name that you want to change. Click Modify. The
Modify Call Park dialog box appears. Click the Help button to see more
information about the dialog box fields.
3 Enter the new name for the Call Park extension in the Name field.
4 Click OK.
Removing a Call Park
Extension
You can remove a Call Park extension at any time.
To remove a Call Park extension:
1 Select NBX NetSet >
Device Configuration
> Call Park.
2 Select the extension that you want to remove.
3 Click Remove. You are prompted to confirm that you want to remove this
extension.
4 Click Yes.
To replace any extension that you remove, see
“Adding a Call Park
Extension”
on
page 156
.
Configuring the
NBX Attendant
Console
The NBX Attendant Console provides extended button mappings and
displays the current status of each extension mapped to it. A receptionist
typically uses the Attendant Console to connect incoming calls to
telephone extensions.
This section describes how to configure the Attendant Console manually.
Alternatively, you can use Auto Discovery to add and configure the device
automatically, and then use the manual configuration procedures in this
section to fine-tune your mappings.
If you auto discover the Attendant Console, do so after you have auto
discovered all telephones, Analog Terminal Adapters, and Analog
Terminal Cards. The Auto Discovery process maps all existing telephones
to the Attendant Console.
This section covers these topics:
■
Adding an Attendant Console