3Com NBX 100 Administrator's Manual - page 158
158
C
HAPTER
3: D
EVICE
C
ONFIGURATION
■
Modifying an Attendant Console
■
Viewing Attendant Console Status
■
Removing an Attendant Console
■
Configuring Attendant Console Buttons
■
Changing Attendant Console IP Settings
Adding an Attendant
Console
Before you add Attendant Consoles, keep the following requirements in
mind:
■
On a NBX V3000 system, you can configure up to 100 Attendant
Consoles.
■
On a SuperStack 3 NBX system, you can configure up to 100
Attendant Consoles.
■
On an NBX 100 system, you can configure up to 50 Attendant
Consoles.
You can associate at most 3 Attendant Consoles with any one telephone.
The NBX Model 3105 Attendant Console requires a license. You must
enter a valid device license key into the NBX NetSet utility before you can
add a 3105 Attendant Console to the system.
To add a new NBX Attendant Console:
1 Select NBX NetSet >
Device Configuration
> Attendant Console.
2 The Add Attendant Console dialog box appears.
3 Fill in the fields for the new Attendant Console. Click the Help button to
see more information about the dialog box fields.
4 Click OK. The system adds the new NBX Attendant Console.
Modifying an
Attendant Console
This section describes how to modify an existing Attendant Console. You
can change an Attendant Console’s device number or associated
telephone. Every Console must be associated with a telephone. To modify
an existing NBX Attendant Console:
1 Select NBX NetSet >
Device Configuration
> Attendant Console.
2 Select the Attendant Console that you want to modify and click Modify.
The Modify dialog box appears.