3Com NBX 100 Administrator's Manual - page 263
System Settings
263
Date and Time
If necessary, you can set the NBX system date and time. It is important
that the date and time are accurate because the system date and time
affect these NBX features:
■
The NBX telephone display panel
■
Business hours behavior
■
Time-dependent prompts in the Auto Attendant
■
Time and date stamp on voicemail
To set the system date and time:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Configuration > System Settings > Date and Time. See the
Help for the procedure on setting the system date and time.
Timers
System timers enable you to set time-out periods for the NBX system
features that are described in
Table 37
.
To set timers:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Configuration > System Settings > Timers. See the Help for
the procedure on setting timers.
Table 37 System Timers Fields
Field
Purpose
Forward Voice Mail On
Timeout
When a telephone’s FWD VMAIL button is enabled, this
field specifies the duration of ringing before a call is
forwarded to voice mail.
If you set this time to under 6 seconds, caller
ID information is not captured in voicemail.
Forward Voice Mail Off
Timeout
When a telephone’s FWD VMAIL button is disabled, this
field specifies the duration of ringing before a call is
forwarded to voice mail.
Line Port Hold Timeout For a call originating on an outside line (Analog Line Card
port), the length of time that the call remains on hold
before it rings at the extension that placed the call on hold.
Call Park Timeout
The length of time that a call can be parked before it rings
at the extension that parked the call.