3Com NBX 100 Administrator's Manual - page 360
360
C
HAPTER
11: T
ROUBLESHOOTING
■
Restart the telephone
Early model NBX Telephones support an earlier version of the LUI utility
that has a slightly different menu. For information on this earlier version
of the LUI utility, see your NBX Voice-Authorized Partner or a version of
the NBX Administrator’s Guide from a release prior to NBX R4.3.
To start the LUI utility:
1 Cycle power to the telephone by disconnecting and then reconnecting its
power connector, and then start the LUI utility (as described in
step 2
,
next) before the telephone finishes its download of code from the call
processor.
For telephones that use a powered Ethernet cable instead of a power
adapter, disconnect and then reconnect the Ethernet cable.
2 To start (or exit from) the LUI utility:
■
On the 3102 Business Telephone, press the Program button:
■
On 1102, 2102, or 2102-IR Business Telephones, press Program:
■
On 3103 Manager’s Telephones and 3101 or 3101SP Basic Telephones,
press the center button in the cursor control button group:
■
On the NBX 2101 Basic Telephone, press the MSG button:
■
On 3106C and 3107C Cordless Telephones, press the Feature button:
The buttons you use to enter information vary with each telephone:
■
3103 Manager’s Telephone, see on
Figure 27
.
■
3102 Business Telephone, see
Figure 28
on
page 362
.
■
3101 or 3101SP Basic Telephones, see
Figure 29
on
page 363
.