3Com NBX 100 Administrator's Manual - page 117
Dial Plan Configuration File Commands
117
szDigits
— The digits to compare to the incoming digits.
Example: These example commands create, in pretranslator 1, entries 1
through 10, each of which looks for a different single digit (0 through 9)
in the incoming digits.
PreTranslatorEntry Create 1 1 0
PreTranslatorEntry Create 1 2 1
PreTranslatorEntry Create 1 3 2
PreTranslatorEntry Create 1 4 3
PreTranslatorEntry Create 1 5 4
PreTranslatorEntry Create 1 6 5
PreTranslatorEntry Create 1 7 6
PreTranslatorEntry Create 1 8 7
PreTranslatorEntry Create 1 9 8
PreTranslatorEntry Create 1 10 9
PreTranslatorEntry Delete
Syntax
PreTranslatorEntry Delete nPreTranslatorId nEntryId
Description Deletes a pretranslator entry or deletes all entries for a
particular pretranslator.
Use caution when using this command to delete Pretranslator entries in
an existing Dial Plan. In general, it is best to delete all tables, routes, and
pretranslators at the beginning of each dial plan configuration file. This
precaution avoids the potential conflicts or unpredictable actions caused
by importing new dial plan entries on top of an existing dial plan.
For instructions on how to edit the dial plan configuration file to delete
existing tables, routes, and pretranslators, see
“Creating Dial Plan
Configuration Files”
on
page 46
.
Arguments
nPreTranslatorId
— An integer in the range 1–32768.
nEntryId
— An integer in the range 1–32768 or * for all entries.
Example: This command deletes pretranslator entry 3 from
pretranslator 2.
PreTranslatorEntry Delete 2 3