3Com NBX 100 Administrator's Manual - page 67
Managing Extension Lists
67
Modifying an
Extension List
To modify an extension list:
1 On the Extension Lists tab, select an extension list.
2 Click Modify. The Modify Extension List dialog box appears.
3 To modify the name of the Extension List, edit the contents of the Name
text box.
If you change the name of an extension list, you invalidate any aspect
of the dial plan that refers to the name. You must change all references
to the extension list name in the dial plan configuration file. If you made
your changes using an editor (as opposed to modifying the dial plan from
within the NBX NetSet utility), you must reimport the dial plan.
4 If you want calls to cycle through the extensions in the list, check the
Cycle Extensions checkbox. Each time that the system accesses the
extension list, it uses the next extension in the list. This arrangement
effectively progresses through the list to balance the load of calls. If Cycle
Extensions is not checked, the extension selection always starts from the
top of the list.
5 To add an extension to the Extensions in List scroll list, select it in the
Extensions not in List scroll list and click the << button. Use Shift+click to
select a block of extensions, or Ctrl+click to select several extensions at
different locations in the list.
6 To remove an extension from the extension list, select it the Extensions in
List scroll list and click the >> button. The extension moves to the
Extensions not in List scroll list.
7 To change the priority of extensions:
a Select the extension from the Extensions in List scroll list.
b Enter a priority number in the text box below the list (from a high of
1 through a low of 99).
c Click the Change Priority in List button.
The new priority appears as the number to the left of the item within
square brackets. The default value is 50. When the system accesses an
extension list, it attempts to use the highest priority extension first.
8 Click OK to enable your changes and exit the dialog box.
Removing an
Extension List
The system does not let you remove an extension list that the dial plan
is using even if that extension list is empty. You must remove the
extension list from the dial plan before you can delete the extension list.