3Com NBX 100 Administrator's Manual - page 136
136
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Modifying a
Telephone
To modify a telephone:
1 Select NBX NetSet >
Device Configuration > Telephones
.
2 Select the telephone that you want to modify from the list.
3 Click
Modify
. The Modify Telephones dialog box appears.
4 Change the desired fields. Click the Help button to see more information
about the dialog box fields.
5 Click Apply to make your changes.
6 Click OK.
Checking a
Telephone’s Status
To check the status of a telephone:
1 Select
Device Configuration
>
Telephones
.
2 Select the telephone for which you want a status report from the list box.
3 Click
Status
. The Device Status dialog box appears.
4 View the device status and make any desired changes.Click the Help
button to see more information about the dialog box fields.
5 When you finish, click Apply, and then click OK.
Removing a
Telephone
To remove a telephone from the system:
1 Select
Device Configuration
>
Telephones
tab.
2 Select the telephone that you want to remove from the list box.
3 Click Remove. A dialog box prompts you to confirm removal.
4 Click Yes. The system removes the selected telephone.
5 On the Users tab, delete the extension. If you do not perform this step,
the extension of the removed telephone becomes a phantom mailbox.
Rebooting a
Telephone
To reboot a telephone:
1 Select
Device Configuration > Telephones
.
2 Choose a telephone from the list, and then click the
Status
button to
open the
Telephones Status
dialog box.