3Com NBX 100 Administrator's Manual - page 160
160
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Configuring Feature Buttons
To map the Attendant Console Feature Buttons:
1 Select NBX NetSet >
Device Configuration
> Attendant Console.
2 Select the Attendant Console for which you want to map Feature
Buttons.
3 Click Feature Buttons. The Feature Button Mappings dialog box appears.
4 Use the drop down list next to each button to select the feature you want
to assign to the button.
To see a description of each function you can assign to a button, click the
Help button on the NBX NetSet Button Mappings screen.
5 Click Apply to implement the new mappings.
Mapping the Attendant Console Access Buttons
To map the NBX Attendant Console Access buttons:
1 Select NBX NetSet >
Device Configuration
> Attendant Console.
2 Select the Attendant Console you want.
3 Click Button Mappings.
4 To map the buttons that you want, follow these steps:
a Select the appropriate column of buttons. Click 1-50 to select columns
A through E, or 51 through 100 to select columns F through J. (This
choice emulates the function of the Shift button on the physical
Attendant Console.)
b Click the letter (A through J) that corresponds to the column of
buttons that you want to map.
c Map the buttons for the column that you selected using the
drop-down list boxes.
To see a description of each function you can assign to a button, click the
Help button on the NBX NetSet Attendant Console Button Mappings
screen.
5 Click Apply for the changes to take effect.
Changing Attendant
Console IP Settings
Although most configurations use IP On-the-Fly or DHCP to assign IP
addresses (and thus cannot manually change the addresses), if you use
Standard IP network protocol, you can manually change the IP address of
Attendant Consoles and other devices.