3Com NBX 100 Administrator's Manual - page 371
The 3Com Telephone Local Configuration Application
371
The 3Com
Telephone Local
Configuration
Application
You can manually configure most 3Com telephones using the telephone
Local User Interface (LUI) utility to define the settings the device needs to
communicate with the NCP. For devices such as the 3100 Entry Telephone
and the 3105 Attendant Console, which do not have a display panel to
show configuration information, you can use the 3Com Telephone Local
Configuration application (TLC).
The TLC application enables you to specify the information that a device
requires to communicate with the NCP over a routed network without
using DHCP. You must still use the Auto Discover feature or manual
configuration through the NBX NetSet utility to add the device to the
NBX system database.
Installing the 3Com
TLC Application
The 3Com Telephone Local Configuration application is a Windows
program that you install and run from a PC.
To install the 3Com Telephone Remote Configuration application:
1 Insert the NBX Resource Pack CD into your CD drive. If the autorun
program does not start the CD browser program, navigate to the CD and
start autorun.exe.
2 Click NBX Applications and then click Telephone Local Configuration.
The installation program creates a shortcut on your Start menu that you
can use to launch the 3Com Telephone Remote Configuration
application.
AB2 Show
EEProm
Lets you scroll through the locations in the memory of the
telephone. The information is presented in hexadecimal format
and can be properly interpreted only by a 3Com service person.
AB3 Ping H3/IP
Run an H3 IP ping test. See
Using H3PingIP
for more
information.
AB4 Reset Phone
Reset the device. You can perform the same task by removing
power from the telephone. However, Option AB4 can be useful
for cordless phones, which cannot easily be disconnected from
power.
Table 66 LUI Menu Items (continued)
Menu Option
Description