Oce cm3530 Network Administrator's Manual - page 165

Network Administrator’s Guide — Setting up NetWare Print Server

165

Setting up NetWare Print Server

This equipment supports the following Novell printing services:

•

NetWare 4.x bindery emulation mode

•

NetWare 4.x NDS mode

•

NetWare 5.x and 6.x NDS mode (over IPX/SPX only)

•

NetWare 5.x and 6.x NDPS mode

This chapter provides an overview of how to set up this equipment as a Novell Network Printer,

Print Server, or NDPS Printer Agent. For more detailed information, refer to your Novell docu-

mentation.

Setting up the NetWare in Bindery Mode

You can connect only one directory tree to this equipment. If you need to connect additional Net-

Ware 4.x servers, do so by using bindery emulation, which causes the 4.x server to behave like,

and be accepted as, a NetWare 3.x server.

NOTE:

•

The file server selected must not be in the same tree as that selected in NDS Setup.

In order to set up the NetWare 4.x server in bindery emulation mode for printing to this equip-

ment, the network administrator must do the following:

•

Edit the network startup file to set the bindery context.

 P.165 "Editing the Network Startup File"

•

Configure the print queues, print server, and printer on the file server.

 P.165 "Setting up the NetWare File Server"

Editing the Network Startup File

The following procedures explain how to edit the bindery contexts in the network startup file.

Editing the bindery context

1.

On NetWare file server, enter “load install” and press the 

[Enter] key.

2.

Select [NCF Files Options] from the menu.

3.

Select [Edit AUTOEXEC.NCF] from the menu.

4.

Search for the file to see if you have a statement similar to the 

following included:

SET BINDERY CONTEXT=0U=ENG

• If the statement above can be found in the file, the server has a bind-

ery. If this is not found, enter the statement above and save the file.

5.

Restart the NetWare file server.

Setting up the NetWare File Server

The following explains how to set up a NetWare 4.x file server with bindery emulation so that

network users can print to this equipment from their computers, and this equipment can obtain

print jobs from the NetWare server.