Oce cm3530 Network Administrator's Manual - page 38
38
Network Administrator’s Guide — Setup Flow for Fax Features
Step 4: Setting up the POP3 Network Service.
You should specify the POP3 service and the user account for this equipment, to receive
Internet Fax.
P.59 "Setting up the POP3 Network Service"
Step 5: Setting the Internet Fax Settings.
In the Internet Fax Settings, you should specify the from address and from name to enable
the Internet Fax transmission. Also you can specify the fragment size, and body text that
apply to the Internet Fax sent from this equipment.
P.79 "Setting up the Internet Fax Settings"
Setup Flow for Onramp Gateway
NOTE:
•
The Onramp Gateway feature is available only when the optional Fax unit is installed.
This equipment can convert received faxes into Emails and forward them to other Internet Fax
devices or client computers using Onramp Gateway transmission.
This equipment can create the ITU-T relay mailbox in which Email addresses are registered as
destinations to achieve the Onramp Gateway transmission. Any ITU-T compatible facsimile
can send a fax to the ITU-T relay mailbox. This equipment then forwards received faxes to the
Email addresses registered in the ITU-T relay mailbox.
To use this equipment as a Hub Station for the Onramp Gateway transmission, the Relay Box in
which Email addresses are registered must be set up. This equipment, as the distributor, can send
an Email of any faxes received from any ITU-T compatible facsimile device.
Onramp Gateway
Sending a fax to the Relay Box of
the equipment through the
Public Switched Telephone network
Send a document as
Internet Fax to the Internet
via SMTP server
The Internet Fax device receives the document
from the Internet as an Internet Fax document.
The client computer receives the document
from the Internet as an email document.
Email addresses
are assigned
as destinations
in the Relay Box
Internet
Internet Fax Device
Client Computers
SMTP Server
ITU-T compatible
G3 Facsimile
ITU-T
Relay Box