Oce cm3530 Network Administrator's Manual - page 65
Network Administrator’s Guide — Setting up Copier Settings
65
•
Manual — Select this to set the Manual mode as the default exposure for black and
white copy. The manual mode manually specifies the density of the original.
6) Bypass feed
Select the default paper type for the Bypass Feed.
7) BOOK > 2
Select the default page arrangement of the book-type originals for Book to 2-sided copy.
•
Open from left — Select this to copy the booklet originals that are read from a left page.
•
Open from right — Select this to copy the booklet originals that are read from a right
page.
8) Magazine Sort
Select the default page arrangement for magazine sort copy.
•
Open from left — Select this to set to create a booklet that can be read from a left page.
•
Open from right — Select this to set to create a booklet that can be read from a right
page.
9) 2in1/4in1
Select the default page arrangement for 2in1/4in1 copy.
•
Write Laterally — Select this to copy each two pages or four pages from right to left or
top to bottom. When the portrait originals are copied using 2in1 or 4in1, this equipment
copies them from right to left. When the landscape originals are copied using 2in1 or
4in1, this equipment copies them from to bottom.
•
Write Vertically — Select this to copy each two pages or four pages from left to right or
top to bottom. When the portrait originals are copied using 2in1 or 4in1, this equipment
copies them from left to right. When the landscape originals are copied using 2in1 or
4in1, this equipment copies them from to bottom.
10) Maximum Copies
Select the maximum numbers of pages that users can specify for copying. You can select
either “999”, “99”, or “9” for the Maximum Copies.
11) Auto 2-sided Mode
Select how the 2-sided mode initially applies to copy settings when originals are set in the
ADF.
•
OFF — Select this to initially apply [1->1 SIMPLEX] when originals are set in the
ADF.
•
One-sided/Double-sided — Select this to initially apply [1->2 DUPLEX] when origi-
nals are set in the ADF.
•
Double-sided/Double-sided — Select this to initially apply [2->2 DUPLEX] when
originals are set in the ADF.
•
User Selection — Select this to initially display the screen to select the 2-sided mode
when originals are set in the ADF.
12) Sorter Mode Priority
Select the default sort mode for copying.