Oce cm3530 Network Administrator's Manual - page 64
64
Network Administrator’s Guide — Setting up Copier Settings
5.
Click [OK] to apply the changes.
NOTE:
•
When using the Internet Explorer, the settings that are displayed in each field may
not be changed even if you change the settings and click [Save]. However, the set-
tings have been changed in the equipment. In that case, click the Copier submenu
then the page displays the current settings in each field.
Setting up the Copier Settings
In Copier Settings, you can set the default copier settings that apply for copy operation from the
Touch Panel Display.
1) Color Mode
Select the default color mode for copying.
2) Original Mode for Color
Select the default original mode for color originals.
3) Original Mode for Black
Select the default original mode for black/white originals.
4) Color Exposure
Select the type of image density for color copy.
•
Auto — Select this to set the Auto mode as the default exposure for color copy. The
Auto mode automatically detects the density of the original to make copies at the opti-
mum exposure.
•
Manual — Select this to set the Manual mode as the default exposure for color copy.
The manual mode manually specifies the density of the original.
5) Exposure
Select the type of image density for black and white copy.
•
Auto — Select this to set the Auto mode as the default exposure for black and white
copy. The Auto mode automatically detects the density of the original to make copies at
the optimum exposure.
1
2
3
4
5
6
7
8
9
10
11
12