Oce cm3530 Network Administrator's Manual - page 176
176
Network Administrator’s Guide — Setting up NetWare Print Server
LPR on IP
If you select the LPR Gateway configuration option, the Remote-LPR Printer Configuration dia-
log box opens:
1.
Enter the IP Address of the equipment and then click [Finish].
2.
To confirm your choice, click [Yes].
When the update is complete, you can proceed to “Select Drivers” on page 176.
Remote Printer on IPX
If you select the Remote Printer on IPX option, the Remote-IPX Printer Configuration dialog
box opens:
1.
Either type the Advertising Print Server name, or click
[Search] to automatically locate print server information and
choose a device name from the drop-down list.
Once you select a server, the remaining fields are populated with the associated
data.
2.
Check the “Manual Configuration” checkbox to edit the
default data.
3.
Click [Finish].
4.
To confirm your choice, click [Yes].
When the update is complete, proceed to “Select Drivers” on page 176.
Queue-Based (NDS Printer Agent)
If you select the Queue-based (NDS Printer Agent) option, the Configure Printer Agent dialog
box opens:
1.
Either type in the Advertising Print Server name, or click
[Search] to automatically locate print server information and
choose a device name from the drop-down list.
Once a server is selected, the remaining fields are populated with the associated
data.
2.
Check the “Manual Configuration” checkbox to edit the
default data.
3.
Click [Finish].
4.
To confirm your choice, click [Yes].
When the update is complete, proceed to “Select Drivers” on page 176.
Select Drivers
After you create a Printer Agent, configure the options. When the update completes, the Select
Printer Drivers dialog box opens:
1.
Select the appropriate operating system tab.