Oce cm3530 Network Administrator's Manual - page 192
192
Network Administrator’s Guide — Troubleshooting Hardware Errors
Device Status Indicators
Copier Maintenance Calls
You can use Imagistics Printer Utility to check if this equipment requires maintenance. The
Device Summary window includes a device icon that displays visual Device Status Indicators in
the event of a device malfunction.
•
Printer Error 1
The above printer error icon indicates that non-recommended toner is used. For information
on resolving the error condition, refer to “REPLACE TONER CARTRIDGE SYMBOL” in
Operator’s Manual for Basic Function.
•
Printer Error 2
The above printer error icon indicates:
-
You need to remove paper from standard output tray.
-
You need to remove paper from Job Separator.
-
You need to remove paper from Finisher tray.
-
You need to remove staples jammed in the Finisher. For information on resolving the
error condition, refer to “CLEAR PAPER SYMBOL” in Operator’s Manual for Basic
Function.
-
You need to clear hole punches from Finisher. For information on resolving the error
condition, refer to “DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)” in
Operator’s Manual for Basic Function.
-
Non-recommended toner is being used. For information on resolving the error condition,
refer to “REPLACE TONER CARTRIDGE SYMBOL” in Operator’s Manual for
Basic Function.
-
You need to remove excess staples from the Saddle-stitch Finisher.
-
You performed saddle stitch printing using mixed paper sizes.
-
Cannot load paper from the LCF.
-
Cannot output to inner tray.
•
Cover Open
The Cover Open error icon indicates that you need to close the cover.
•
Drawer Open
3
Are you able to identify the
problem from the error mes-
sage and resolve it?
End
Ö
Refer to the Operator’s Manual
for Basic Function to trouble-
shoot the condition.
No Check...
Yes
No
For Instruction, Go To...