Oce cm3530 Network Administrator's Manual - page 33

Network Administrator’s Guide — Setup Flow for Scanning Features

33

Setup Flow for Scanning Features

This section describes the minimum setup flow required to configure this equipment for scan-

ning.

Setup Flow for Save as file

The Save as file feature allows users to save images — scanned by a copy operation, scan oper-

ation, or fax operation — to the local hard disk or the network shared folder.

You can enable or disable the Save as file into the local folder and network folders.  When

enabled, you can specify which network folders to save the scanned file, or you can allow users

to specify the network folders for each Save as file operation.

Setup procedure

Step 1: Setting up the TCP/IP and the HTTP Network Service to enable 

Imagistics Printer Utility.

You should set the TCP/IP and HTTP Network Service from the Touch Panel Display the

first time you use it, to make Imagistics Printer Utility available.  Please see the User Func-

tions Guide to configure the TCP/IP and HTTP Network Service from the Touch Panel Dis-

play, or from Imagistics Printer Utility.

 P.51 "Setting up the TCP/IP"

 P.56 "Setting up the HTTP Network Service"

Step 2: Setting up the SMB Session.

When the SMB protocol is used to send scanned files to a network folder, the SMB Session

must be configured to permit sending the scanned files to the network folder.  Also the Net-

BIOS name and workgroup must be set to enable users to browse the local folder in the

equipment and access the scanned files in it from client computers.

 P.55 "Setting up the SMB Session"

Step 3: Setting up the FTP Network Service, if required.

When the FTP protocol is used to send scanned files to a network folder, the FTP Client Ser-

vice should be enabled.  Also the network folders must be configured as the FTP accessible

folders.

 P.60 "Setting up the FTP Client"

Step 4: Setting up the Destination.

You should configure the destination.  You can allow users to save scanned files only in the

local folder, or allow users to save scanned files in the network folders.

 P.73 "Setting up the Destination"

Windows 98

Windows Me

Windows NT 4.0

Windows 2000

Windows XP

Windows Server 2003

Connecting over TCP/IP Network

Copy/Scan/Fax

Local Hard Disk

Save as File into Network folders

Save as File

into Local folders

Network Hard Disk