Oce cm3530 Network Administrator's Manual - page 48

48

Network Administrator’s Guide — Setting up Device Settings

6) Network path or queue name

Enter the queue name for SMB printing.  This queue name is used when users use the dis-

covery function of the installer to obtain the network queue during the installation.  Gener-

ally use “print” for the Network path or queue name.

7) Location

Enter the name of the department or site. This is displayed in the Device tab page that

appears first when accessing the Imagistics Printer Utility web site for users.

8) Contact Information

Enter the name or title of the contact person for this equipment.  This is displayed in the

Device tab page that appears first when accessing the Imagistics Printer Utility web site for

users.

9) Service Phone Number

Enter the phone number for service on this equipment.  This is displayed in the Device tab

page that appears first when accessing the Imagistics Printer Utility web site for users.

10) Administrative Message

Enter the message about this equipment for all users to read.  This is displayed in the Device

tab page that appears first when accessing the Imagistics Printer Utility web site for users.

11) Administrator’s Password

If you want to change the administrator’s password used to log in functions from the Touch

Panel Display and Imagistics Printer Utility, enter the 6-digit password.  You cannot leave

this field blank.

Setting up the Energy Save

You can set the time to enter the Auto Clear, Auto Power Save and Auto Power Off mode.

1) Auto Clear

Select how long this equipment can remain inactive before the Touch Panel Display auto-

matically returns to the default display and settings.

2) Auto Power Save

Select how long this equipment can remain inactive before entering the power save mode.

3) Sleep/Auto Shut Off

Select how long this equipment can remain inactive before entering the sleep mode or auto

shut off mode.

Setting up the Time and Date

You can set the date, time, time zone, and date format.  You can also enable the daylight mode.

1

2

3

1

2

3

4