Oce cm3530 Network Administrator's Manual - page 174
174
Network Administrator’s Guide — Setting up NetWare Print Server
•
The Imagistics NDPS Gateway supports network configurations that are based on both a
server and the Windows operating system.
Prerequisites
Install NDPS in the NetWare servers. NDPS comes with NetWare 5, but it is not installed auto-
matically. The NDPS install program extends the NDS schema for three NDS objects:
•
NDPS Manager
•
NDPS Broker
•
NDPS Printer Agent
To load the Imagistics NDPS gateway on NW4, besides loading CLIBAUX.NLM, you need to
have the Novell new localization conversion tables installed in SYS:\SYSTEM. You can find
these files from latest Support pack 8a for NetWare 4.11 or 4.2. After you extract the support
pack compressed file, you must copy the UNI*.NLM files and LOCNLM32.NLM to SYS:\SYS-
TEM directory on the server.
Installing the Imagistics NDPS Gateway
1.
Insert the Admin’s Client CD-ROM into the CD-ROM drive on
the administrative workstation.
2.
Copy “tndps.exe”, the self extracting executable file from the
CD-ROM to the workstation. Double-click the file to launch
the InstallShield setup program.
3.
Follow the Setup Wizard’s prompt to supply the server vol-
ume or Browse to select a mapped drive.
4.
Click [Next] to proceed with installation. When the NDPS
Gateway and NetWare snap-in components have been
installed, you can configure the equipment as an NDPS
object.
— Setting up the equipment as an NDPS Object
Considerations and Limitations
This equipment should be automatically discovered by the Imagistics NDPS Gateway. If not,
manually create a new NDPS Printer Agent. (
P.175 "Create a Printer Agent")
Prerequisites
1.
Load “NWADMN32.EXE” on the administrator workstation to
launch the NetWare administration program.
2.
Determine the Tree or Context under which to install the
NDPS printer agent.
3.
Verify that both a NDPS Manager and Broker object exist at
this level. If not, create them.