Oce cm3530 Network Administrator's Manual - 10.
Network Administrator’s Guide — Setting up NetWare Print Server
169
Before configuring the NetWare file server in NDPS mode, please confirm followings:
•
For NetWare 5.x, the Support Pack 5 and Novell Gateway version 2.1.6 or later with
ndps3sp2c are installed.
•
For NetWare 6.x, the Support Pack 2 and Novell Gateway version 3.00 or later with
ndps3sp2c are installed.
•
Make sure you have a valid IP address for this equipment and for any computers that will
print to it.
•
In cm4530 Series Setup, enable TCP/IP and enter the IP address, Subnet mask, and Gateway
address for this equipment.
Setting up the NDPS with NetWare Administrator
1.
In NetWare Administrator, select the container object to cre-
ate the printer and click the [Object] menu and select [Cre-
ate].
• The New Object dialog box appears.
2.
Select “NDPS Broker” and click [OK].
• The Create NDPS Broker Object dialog box appears.
SUPPLEMENT:
•
If the NetWare file server has been installed as supporting the NDPS service, the
NDPS Broker is created as default. In this case, you can use the default NDPS Bro-
ker.
3.
Specify the “NDPS Broker Name” and “RMS Volume”
options, and click [Create].
• The NDPS Broker is created.
4.
Click the [Object] menu and select [Create].
• The New Object dialog box appears.
5.
Select “NDPS Manager” and click [OK].
• The Create NDPS Manager Object dialog box appears.
6.
Specify the “NDPS Manager Name”, “Resident Server”, and
“Database Volume” option, and click [Create].
• The NDPS Manager is created.
7.
Double-click the NDPS Broker object that you created.
• The NDPS Broker dialog box appears.
8.
Click [Resource Management (RMS)].
9.
Click [Add Resources...].
• The Manage Resources dialog box appears.
10.
Select the applicable OS icon in the “Resource Types” list,
and click [Add...].
• The Add Resources dialog box appears.