Oce cm3530 Network Administrator's Manual - page 50

50

Network Administrator’s Guide — Setting up Network Settings

Setting up Network Settings

In the Network submenu page in the Setup menu, an administrator can configure the network

settings such as TCP/IP, IPX/SPX, AppleTalk, DNS Session, DDNS Session, SLP Session, SMB

Session, NetWare Session, HTTP Network Service, SMTP Network Service, POP3 Network

Service, FTP Client, and SNMP Network Service.

Setting the network settings

1.

Access Imagistics Printer Utility in the administrator mode.

 P.15 "Accessing Imagistics Printer Utility Administrator Mode"

2.

Click the Setup menu and Network submenu.

• The Network submenu page is displayed.

3.

In the Network submenu page, set the network settings as 

required.

• In the Network submenu page, you can set the following:

 P.51 "Setting up the TCP/IP"

 P.52 "Setting up the IPX/SPX"

 P.52 "Setting up the AppleTalk"

 P.53 "Setting up the Rendezvous"

 P.53 "Setting up the LDAP Session"

 P.54 "Setting up the DNS Session"

 P.54 "Setting up the DDNS Session"

 P.54 "Setting up the SLP Session"

 P.55 "Setting up the SMB Session"

 P.56 "Setting up the NetWare Session"

 P.56 "Setting up the HTTP Network Service"