Oce cm3530 Network Administrator's Manual - page 184
184
Network Administrator’s Guide — Troubleshooting Overview
IPP Printing in a Windows Operating System Environment:
Novell Printing in a NetWare Environment:
2
Is the LPR/LPD Printing cor-
rectly set?
Next Step
Ø
Ö
Setup the LPD print service cor-
rectly.
P.86 "Setting up the LPD
Print"
3
Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
4
Is the LPR port configured
with correct IP address?
Next Step
Ø
Ö
See the Printing Guide to config-
ure the proper port.
5
Can you print to this equip-
ment?
End
Ö
Refer to following section to
troubleshoot the condition.
P.199 "Cannot Print To This
Equipment"
No Check...
Yes
No
For Instruction, Go To...
1
Are the IP Address properties
correctly set?
Next Step
Ø
Ö
Setup the IP address correctly.
P.51 "Setting up the TCP/IP"
2
Is the HTTP Server on this
equipment enabled?
Next Step
Ø
Ö
Enable the HTTP server in the
HTTP Network Service.
P.56 "Setting up the HTTP
Network Service"
3
Is the IPP Printing correctly
set?
Next Step
Ø
Ö
Setup the IPP print service cor-
rectly.
P.87 "Setting up the IPP
Print"
4
Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
5
Is the IPP port configured
with correct URL?
Next Step
Ø
Ö
See the Printing Guide to config-
ure proper port.
6
Can you print to this equip-
ment?
End
Ö
Refer to following section to
troubleshoot the condition.
P.199 "Cannot Print To This
Equipment"
No Check...
Yes
No
For Instruction, Go To...
1
Are the IPX/SPX protocol
enabled? Is the correct frame
type selected?
Next Step
Ø
Ö
Setup the IPX/SPX correctly.
P.52 "Setting up the IPX/
SPX"
No Check...
Yes
No
For Instruction, Go To...