Oce cm3530 Network Administrator's Manual - page 60

60

Network Administrator’s Guide — Setting up Network Settings

Setting up the FTP Client

In FTP Client, you can specify the default port number used for the Save as file using the FTP

protocol.

1) Default Port Number

Enter the port number to access the FTP site.  The port number depends on the port setting in

the FTP site.  Generally “21” is used.

Setting up the FTP Server

In FTP Server, you can enable or disable the FTP server functions.

1) Enable FTP Server

Select whether the FTP server is enabled or disabled.  Select Enable to enable the reading/

writing the address book data using the Address Book Viewer.

2) Default Port Number

Enter the port number for the FTP server.  Generally “21” is used.

1

1

2