Rauch QUANTRON-A Instruction Manual - page 104
Alarm messages and possible causes
6
98
6.2
Clearing an error/alarm
6.2.1
Acknowledging an alarm message
Alarm messages are highlighted on the display and displayed with a warning
symbol.
Figure 6.1:
Alarm message (e.g. dosing system)
1.
Correct the cause of the alarm message.
Observe the operating manual of the machine and section
.
2.
Press the
C/100 %
key.
The alarm message is cleared.
6.2.2
M EMC alarm message
In case of M EMC control, spreading can be continued even if the alarm messag-
es [45] to [50] have been confirmed.
The operating screen displays a warning icon until the M EMC function failure is
corrected.
NOTICE
Fertiliser spreading and spreading work to be carried out on your own responsi-
bility.
Correct the error or the cause for the failure as soon as possible.