Rauch QUANTRON-A Instruction Manual - page 27
Manual is about: M EMC
of
114
Attachment and installation
21
3
3.4
Metering slide preparation
The machines AXIS-M 30.1 EMC + W are provided with an electric slide actua-
tion for adjusting the application rate.
Figure 3.6:
Metering slide preparation (example)
n
CAUTION
Damage to property caused by incorrect positioning of the
metering slide
Operation of the actuators by the QUANTRON-A can cause dam-
age to the metering slides if the stop levers are incorrectly posi-
tioned.
Always clamp the stop levers at the
maximum
scale posi-
tion.
NOTICE
Observe the operating manual of your tractor.