Rauch QUANTRON-A Instruction Manual - page 64
Operation QUANTRON-A
4
58
4.7
Fast emptying
In order to quickly clean the machine after the spreading work or to quickly empty
any residual quantities, the
Fast emptying
menu can be selected.
Before storing the machine, we recommend to
completely open
both metering
slides via the fast emptying function and to switch off the QUANTRON-A in this
state. This prevents accumulation of humidity in the hopper.
Carrying out the fast emptying process:
1.
Open the
Main menu > Fast emptying
menu.
Figure 4.19:
Fast emptying menu
[1] Metering slide opening display
[2] Symbol for fast emptying (here: left side selected, but not yet started)
[3] Fast emptying of right section (not selected)
[4] Fast emptying of left section (selected)
NOTICE
Before
starting the fast emptying process, it has to be ensured that all precon-
ditions have been met. Please observe the operator's manual of the machine
(emptying of remaining material).
n
CAUTION
Risk of injury due to automatic adjustment of the drop point!
With machines equipped with electrical drop point actuators, the
Move to drop point
alarm message appears. Upon activation of
the
Start/Stop
key, the drop point is automatically moved to the
preset value by means of the electrical actuating cylinders. This
may cause injury and property damage.
Before pressing
Start/Stop
, ensure that
nobody
is present
in the danger zone of the machine.
4
1
2
3