Rauch QUANTRON-A Instruction Manual - page 33
Operation QUANTRON-A
27
4
4.3.1
Trip counter
This menu provides the following values:
-
kg spread
-
spread area (ha)
-
spread distance (m)
Figure 4.3:
Trip counter menu
[1] Display of spread quantity since the last reset
[2] Display of spread area since the last reset
[3] Display of spread distance since the last reset
[4] Clearing the trip counter: all values to 0
Deleting the trip counter:
1.
Open the
Weighing trip counter > Trip-counter
sub-menu.
The calculated values for spread quantity, area and distance
since the
last deletion
are displayed.
The
Delete trip counter
field is highlighted.
2.
Press the
Enter key
.
All values of the trip counter are reset to 0.
3.
Press the
kg key
.
The operating screen is displayed again.
Checking the trip counter during spreading:
During the spreading work, i.e. with the metering slides being open, change into
the
Trip counter
menu and obtain the current values there.
NOTICE
If the values are to be permanently monitored during spreading, freely assigna-
ble display fields in the working screen may also be assigned the
kg Trip
,
ha Trip
or
m Trip
values, refer to chapter
4.9.2: Display configuration, page 68
.
1
2
4
3