Rauch QUANTRON-A Instruction Manual - page 60
Operation QUANTRON-A
4
54
Important information on the use of operating modes for spreading is provid-
ed in chapter
5.4: Spreading with automatic operating mode
(AUTO km/h + AUTO kg), page 85
.
AUTO km/h + AUTO kg: automatic operation with automatic mass flow con-
trol:
The
AUTO km/h + AUTO kg
operating mode continuously controls the fertiliser
quantity during spreading operation according to the forward speed and the flow
behaviour of the fertiliser. This optimises the metering of the fertiliser.
AUTO km/h: Automatic operation
1.
Switch on the QUANTRON-A control unit.
2.
Open the
Machine settings > AUTO / MAN mode
menu.
3.
Highlight the
AUTO km/h
menu item
4.
Press the
Enter key
.
5.
Configure the fertiliser settings:
Application rate (kg/ha)
Working width (m)
6.
Fill the hopper with fertiliser.
7.
Carry out calibration for flow factor determination
or
Determining flow factor from the provided fertiliser chart.
8.
Enter the flow factor manually.
9.
Press the
Start/Stop
key.
The spreading starts.
MAN km/h: manual operation
1.
Switch on the QUANTRON-A control unit.
2.
Open the
Machine settings > AUTO / MAN mode
menu.
3.
Select
MAN km/h
in the menu.
The
Forward speed
input window is displayed.
4.
Enter the forward speed during spreading.
5.
Press the
Enter key
.
NOTICE
In order to achieve an optimum spreading result, you should carry out a calibra-
tion before starting to spread.
NOTICE
In order to achieve an optimum spreading result, you should carry out a calibra-
tion before starting to spread.