Rauch QUANTRON-A Instruction Manual - page 87
Spreading operation with the QUANTRON-A control unit
81
5
5
Spreading operation with the QUANTRON-A control unit
The QUANTRON-A control unit supports setting of the machine before operation.
During spreading, functions of the control unit are also active in the background.
With these functions, the quality of fertiliser spreading can be monitored.
5.1
Querying the remaining quantity during spreading (AXIS-M 30 EMC + W only)
During spreading, the remaining quantity is continuously recalculated and dis-
played.
During spreading
, i.e. with the slides open, change to the
Rest (kg, ha, m)
menu to display the residual quantity currently in the hopper.
Working with the weighed remaining quantity, refilling the hopper:
1.
Tare the scales.
Refer to chapter
4.3.3: Tare scales (AXIS-M 30.1 EMC + W only), page 29
2.
Select the fertiliser type used.
Refer to chapter
4.5.11: Fertiliser chart, page 44
.
3.
Fill the hopper.
4.
Weigh the fertiliser quantity in the hopper.
5.
Start your work.
If the hopper is empty, refill it.
6.
Repeat steps
2
to
5
.
NOTICE
If the values are to be permanently monitored during spreading, freely assigna-
ble display fields in the operating screen can also be assigned the
kg rest
,
ha rest
or
m rest
values, refer to chapter
4.9.2: Display configuration, page 68
.