Rauch QUANTRON-A Instruction Manual - page 38
Operation QUANTRON-A
4
32
Sub-menu
Meaning/possible values
Description
Fertiliser name
Fertiliser selected from the fertiliser
chart.
Application rate
(kg/ha)
Input of target value for the application
rate in kg/ha.
Working width (m)
Determination of the working width to
be spread.
Flow factor
Input of the flow factor of the fertiliser
used.
Drop point
Input of the drop point. This display is
only for information.
Please observe
the operator's
manual of the
machine.
TELIMAT quantity
Quantity reduction presetting for limited
border spreading.
Start calibration
Accessing the sub-menu for calibration
test.
Spreading disc
Selection list:
S2
S4
S6
S8
Selection with
Arrow keys
.
Confirm by
pressing the
Enter key
.
PTO
Factory setting: 540rpm
Boundary spreading
type
Selection list:
Boundary
Border
Selection with
Arrow keys
.
Confirm by
pressing the
Enter key
.
TELIMAT bor-
der/boundary
Saving the TELIMAT settings for bor-
der spreading.
Only for ma-
chines with
TELIMAT.
Fertilisation method
Selection list:
Normal
Late
Selection with
Arrow keys
.
Confirm by
pressing the
Enter key
.
Mounting height
Input in cm
Selection list: 0/6, 40/40, 50/50, 60/60,
70/70, 70/76
Manufacturer
Fertiliser manufacturer input.