Rauch QUANTRON-A Instruction Manual - page 59
Operation QUANTRON-A
53
4
4.6.2
AUTO/MAN mode
By default, you will work in the
AUTO km/h + AUTO kg
mode. The control unit
automatically controls the actuators on the basis of the forward speed signal and
the
M EMC function
.
You will work in
manual
operating mode (MAN scale or MAN km/h) in the follow-
ing cases
only
:
there is no speed signal (radar or wheel sensor not available or defective),
application of slug pellets or seeds (fine seeds).
Selecting the operating mode
1.
Switch on the QUANTRON-A control unit.
2.
Open the
Machine settings > AUTO / MAN mode
menu.
3.
Highlight the desired menu item.
4.
Press
Enter
.
NOTICE
For uniform spreading of the spreading material, a
constant forward speed
has
to be applied in manual operating mode.
NOTICE
Spreading work with different operating modes is described in chapter
5: Spreading operation with the QUANTRON-A control unit, page 81
Menu
Meaning
Description
AUTO km/h + AUTO kg
Selecting the automatic mode with
automatic weighing
AUTO km/h
Selecting the automatic mode
MAN km/h
Adjustment of forward speed for
manual mode
MAN scale
Metering slide adjustment for man-
ual mode
NOTICE
It is recommended to have the flow factor displayed in the operating screen. This
way, the mass flow control can be observed during spreading. Please refer to
chapter
4.9.2: Display configuration, page 68
and chapter