Rauch QUANTRON-A Instruction Manual - Operation Quantron-A
Operation QUANTRON-A
23
4
4
Operation QUANTRON-A
4.1
Switching on the control unit
Requirements:
The control unit is correctly connected to the machine and the tractor (for ex-
ample, see chapter
3.3: Connecting the control unit, page 17
A minimum voltage of
11V
is guaranteed.
n
CAUTION
Risk of injury due to ejected fertiliser!
In the case of a fault, it is possible that the metering slide unexpect-
edly opens during road transport to the spreading location. There
is a risk of slipping and personal injury due to discharged fertiliser.
Before leaving for the place of spreading
the electronic
control unit QUANTRON-A must always be switched off.
NOTICE
The settings of each menu are very important for optimal
automatic mass flow control (M EMC function)
.
The following menu items must be observed in particular:
In the
Fertiliser settings
menu
-
Spreading disc type. See
-
PTO speed. See
.
In the
Machine settings
menu
-
NOTICE
The operating manual describes the functions of the QUANTRON-A control unit
as of software version 2.20.00
.