Rauch QUANTRON-A Instruction Manual - page 69

Operation QUANTRON-A

63

4

4.8.4

Importing and exporting field data

The control unit QUANTRON-A allows for importing and/or exporting the record-

ed field data. 

Importing field data (PC to QUANTRON-A)

Requirements:

Use the USB stick supplied.

Do not

 alter the directory structure on the USB stick.

-

The data on the USB stick are available in the „\\USB-BOX\Quantro-

nE\Schlagdateien\Import“ directory.

1.

Call up the 

Field data

 menu.

2.

Press 

F1

 function key (see 

figure 4.20

).

Error message no. 7 appears indicating that the current files will be over-

written. See 

6.1: Meaning of the alarm messages, page 95

.

3.

Press the 

Start/Stop

 key.

The consequences of importing field data are as follows

All field data currently stored in the QUANTRON-A are overwritten.

If you have defined the application rate on the PC, the application rate is au-

tomatically transferred and immediately activated in the 

Fertiliser settings

when starting the field data.

If you enter an application rate outside the range of 10-3000, the value in the 

Fertiliser settings

 menu is not overwritten.

Exporting field data (QUANTRON-A to PC)

Requirements:

Use the USB stick supplied.

Do not

 alter the directory structure on the USB stick.

-

The data on the USB stick are available in the „\\USB-BOX\Quantro-

nE\Schlagdateien\Export“ directory.

1.

Call up the 

Field data

 menu.

2.

Press 

F4

 function key (see 

figure 4.20

).

NOTICE

You can interrupt the import of field data at any time by pressing the 

ESC key

!