Rauch QUANTRON-A Instruction Manual - page 74
Manual is about: M EMC
of
114
Operation QUANTRON-A
4
68
4.9.2
Display configuration
The display fields in the operating screen of the control unit can be configured as
desired. You can assign the three display fields with the following values if de-
sired:
Forward speed
Flow factor (FF)
Time
ha trip
kg trip
m trip
kg Rest
m Rest
ha Rest
Idle time
Figure 4.25:
Display configuration menu
[1] Display field 1
[2] Display field 2
[3] Display field 3
Select display
1.
Open the
System/test > Display configuration
menu.
2.
Select the required
display field
.
3.
Press the
Enter key
.
The available display options are listed.
4.
Select the new value to be assigned to the display field.
5.
Press the
Enter key
.
The
operating screen
is shown on the display. The respective
display
field
displays the new value.
1
2
3