Rauch QUANTRON-A Instruction Manual - page 52
Operation QUANTRON-A
4
46
4.5.12 Varispread calculation
The VariSpread section assistant calculates the section steps based on your in-
puts made on the first pages of the
fertiliser settings
.
Figure 4.13:
VariSpread calculation, example with 8 sections (4 on each side)
[1] Adjustable section settings
[2] Predefined section settings
1.
Press the
VariSpread calculation
menu entry.
The control unit will calculate the settings values.
The calculated values are filled into the table.
The quantity reduction is set to
AUTO
.
The first line corresponds to the pre-set values from the
Fertiliser settings
menu. These values are fixed and cannot be modified.
Lines 2 to 4 represent the adjustable section.
You can adjust the different values in the table according to your require-
ments.
-
Width (m): Spreading width referring to one spreading side,
-
DP: Drop point at reduced speed,
-
Quantity (%): Shortage quantity as percentage reduction of the set appli-
cation rate.
The last line corresponds to the closed position of the sections. No fertiliser
is spread.
NOTICE
Up to 3 section steps can be set.
NOTICE
The quantity adjustment of 0% automatically corresponds to the quantity re-
quired in the case of the reduced working width and should not be changed!
1
2