Rauch QUANTRON-A Instruction Manual - page 51
Operation QUANTRON-A
45
4
9.
Edit the parameters of the
fertiliser chart
.
Refer to chapter
4.5: Fertiliser settings, page 31
Selecting a fertiliser chart:
1.
Open the
Fertiliser settings > Fertiliser chart
menu.
2.
Highlight the required fertiliser chart.
3.
Press the
Enter key
.
The selection window is displayed.
4.
Highlight the
Open and return...
option.
5.
Press the
Enter key
.
The Fertiliser settings menu is displayed and the selected element is
loaded into the fertiliser settings as Active fertiliser chart.
Copying an existing fertiliser chart
1.
Highlight the required fertiliser chart.
2.
Press the
Enter key
.
The selection window is displayed.
3.
Highlight the
Copy element
option.
4.
Press the
Enter key
.
A copy of the fertiliser chart is now on the first free position of the list.
Deleting an existing fertiliser chart
1.
Highlight the required fertiliser chart.
2.
Press the
Enter key
.
The selection window is displayed.
3.
Highlight the
Delete element
option.
4.
Press the
Enter key
.
The fertiliser chart is deleted from the list.
NOTICE
The active fertiliser chart
cannot
be deleted.