Rauch QUANTRON-A Instruction Manual - page 39
Operation QUANTRON-A
33
4
4.5.1
Application rate
In this menu, you can enter the desired target value for the application rate.
Entering the application rate:
1.
Open the
Fertiliser settings > Application rate (kg/ha)
menu.
The
currently applied
application rate is displayed.
2.
Enter the new value in the input field.
Refer to chapter
4.12.2: Entering values with the cursor keys, page 79
3.
Confirm the input by pressing the
Enter key
.
The new value is saved in the control unit.
4.5.2
Working width
In this menu, the working width can be set (in m).
1.
Open the
Fertiliser settings > Working width (m)
menu.
The
currently applied
working width is displayed.
2.
Enter the new value in the input field.
Refer to chapter
4.12.2: Entering values with the cursor keys, page 79
3.
Confirm the input by pressing the
Enter key
.
The new value is saved in the control unit.
Composition
Percentage of the chemical composi-
tion.
Calculation of Opti-
Point
Input of the GPS control parameters
Switch-on distance
(m)
Input of switch-on distance.
Switch-off distance
(m)
Input of switch-off distance.
GPS control info
Display of information of the GPS con-
trol parameters.
Fertiliser chart
Management of fertiliser charts.
VariSpread calcula-
tion
Calculation of values for adjustable
sections
Sub-menu
Meaning/possible values
Description