Rauch QUANTRON-A Instruction Manual - page 16
Layout and function
2
10
The icons and displays in the example have the following meaning:
No. Icon / display
Meaning (in the example shown)
1
Metering slide
scale opening left
Current opening position of the left metering slide.
2
Operating mode
Indicates the current operating mode.
AUTO km/h + AUTO kg is the operating mode
used for the
M EMC
function.
3
TELIMAT icon
This icon appears if the
TELIMAT sensors
are in-
stalled and the
TELIMAT function
is enabled (facto-
ry setting) or the
T key
is activated.
4
Quantity change
right
Quantity change (
+/-
) in percent.
Display of quantity changes.
Range of values +/-
1...99%
possible.
5
Application rate
Preset
application rate.
6
Display fields
Individually configurable display fields (here: Forward
speed, spread quantity, flow factor left/right)
Possible configuration: see chapter
4.9.2: Display configuration, page 68
.
7
Icon fields
Icon assignment to the fields
depending on the
menu
.
Selection of the function by means of the
func-
tion keys
below.
8
PTO speed
Current PTO speed
See
9
Drop point
Current position of the drop point
10
Section left
Display of status of left section. See