Rauch QUANTRON-A Instruction Manual - page 77

Operation QUANTRON-A

71

4

Linbus example

1.

Open the 

System/Test > Test/Diagnosis

 menu.

2.

Highlight the 

Linbus

 menu item.

3.

Press the 

Enter key

.

The display shows the actuator/sensor status.

Figure 4.27:

Test/diagnosis; example: Linbus

[1] Status display

[2] Start self-test

[3] Connected actuators

Linbus participant status notification

The actuators are in different conditions:

0 = OK; no actuator error

2 = blockage

4 = overload

n 

CAUTION

Risk of injury by moving machine parts.

During the tests, machine parts may start to move automatically.

Ensure that nobody is present in the area of the machine 

before carrying out the tests.

1

2

3