Rauch QUANTRON-A Instruction Manual - page 22
Manual is about: M EMC
of
114
Attachment and installation
3
16
3.2.2
7-pin plug connector
The control unit receives the pulses for the current forward speed via the 7-pin
plug connector 9684-1/ISO 11786). For this purpose, the 7-pin to 8-pin cable (ac-
cessory) is connected to the forward speed sensor at the plug connector.
[1] PIN 1: actual forward speed (radar)
[2] PIN 2: theoretical forward speed (e. g. gear-
box, wheel sensor)
Figure 3.2:
PIN assignment for 7-pin plug connector