Rauch QUANTRON-A Instruction Manual - page 57

Operation QUANTRON-A

51

4

Recalibrating the forward speed signal:

You can either overwrite an existing profile or create a profile in an empty memory 

location.

1.

Select the desired memory location in the 

Tractor (km/h)

 menu using the 

function key below.

2.

Select the 

New calibration

 field.

3.

Press the 

Enter key

.

The display shows the Tractor (km/h) calibration menu.

Figure 4.16:

Tractor (km/h) calibration menu

[1] Tractor name field

[2] Display of origin of speed signal

[3] Display of number of pulses over 100m

[4] Automatic calibration sub-menu

[5] Radar pulse transducer

[6] Wheel pulse transducer

4.

Highlight the 

Tractor name field

.

5.

Press the 

Enter key

.

6.

Input the name of the profile.

Entering text into the control unit is described in section 

4.12.1: Text input, 

page 77

.

7.

Select the pulse transducer for the forward speed signal.

For 

Radar pulses

, press the 

F1

[5] function key.

For 

Wheel pulses

, press the 

F2

[6] function key.

The pulse transducer is displayed.

NOTICE

The input of the name is restricted to 

16 characters

.

We recommend using the profile with the name of the tractor for ease of under-

standing. 

1

2

4

3

5

6