Rauch QUANTRON-A Instruction Manual - page 93
Manual is about: M EMC
of
114
Spreading operation with the QUANTRON-A control unit
87
5
5.5
Spreading with AUTO km/h operating mode
1.
Configure the fertiliser settings:
Application rate (kg/ha)
Work width (m)
2.
Fill in the fertiliser.
3.
Carry out calibration for flow factor determination
or
Obtain the flow factor from the fertiliser chart.
4.
Enter the flow factor manually.
5. Press the Start/Stop
key.
The spreading starts.
NOTICE
In order to achieve an optimum spreading result in the AUTO km/h operating
mode, a calibration is to be carried out before starting the spreading work.