D-Link DS-3550 Command Line Interface Reference Manual - Vlan C
100
16
A
SYMMETRIC
VLAN C
OMMANDS
The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Used to enable the asymmetric VLAN function on the switch.
Syntax
enable asymmetric_vlan
Description
This command enables the asymmetric VLAN function on the switch
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable asymmetric VLANs:
DES-3550:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3550:4#
disable asymmetric_vlan
Purpose
Used to disable the asymmetric VLAN function on the switch.
Syntax
disable asymmetric_vlan
Description
This command disables the asymmetric VLAN function on the switch
Parameters None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable asymmetric VLANs: