D-Link DS-3550 Command Line Interface Reference Manual - page 55
47
config snmp system_location
characters can be used.
Parameters
string is accepted if there is no location desired.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To configure the switch location for “
H Q 5 F
”:
DES-3550:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3550:4#
config snmp system_name
Purpose
Used to configure the name for the switch.
Syntax
config snmp system_name {
Description
The config snmp system_name command configures the name of
the switch.
Parameters
string is accepted if no name is desired.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To configure the switch name for “
D E S- 35 5 0 S wi t ch ”:
DES-3550:4#config snmp system_name DES-3550 Switch
Command: config snmp system_name DES-3550 Switch
Success.
DES-3550:4#
enable rmon
Purpose
Used to enable RMON on the switch.
Syntax
enable rmon