D-Link DS-3550 Command Line Interface Reference Manual - page 191
183
DES-3550:4#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
Darren 10.53.13.2 TACACS
tacacs 10.53.13.94 TACACS
tacacs+ (This group has no entry)
xtacacs (This group has no entry)
Total Entries : 4
DES-3550:4#
config authen parameter response_timeout
Purpose
Used to configure the amount of time the switch will wait for a user to
enter authentication before timing out.
Syntax
config authen parameter response_timeout
Description
This command will set the time the switch will wait for a response of
authentication from the user.
Parameters
response_timeout
will wait for a response of authentication from the user attempting to
log in from the command line interface or telnet interface.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To configure the response timeout for 60 seconds:
DES-3550:4# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DES-3550:4#
config authen parameter attempt
Purpose
Used to configure the maximum number of times the switch will
accept authentication attempts.
Syntax
config authen parameter attempt
Description
This command will configure the maximum number of times the
switch will accept authentication attempts. Users failing to be